BiPAP Auto with Bi-Flex Sleep therapy system
This product is no longer available

BiPAP Auto with Bi-Flex Auto with Bi-Flex

Sleep therapy system

This product is no longer available

Find similar products

Bi-level positive airway pressure (BiPAP) can mean the difference between compliance and noncompliance for patients struggling to adapt to CPAP therapy. It emulates natural breathing through pressure relief, for an enhanced level of comfort.

Specifications

General system
General system
Pressure range
  • 4 to 25 cm H₂O
Flex pressure relief
  • 0 to 3 cm H₂O
Ramp time
  • 0 to 45 min (5-min increments) minute(s)
Warranty
  • Two years (US only)
Starting ramp pressure
  • 4 to min EPAP pressure (patient adjustable) and 4 to min EPAP pressure (auto mode) cm H₂O
Diameter
  • 18 cm L x 14 cm W x 10 cm H (7" L x 5.5" W x 4" H)
On-board data storage capacity (minimum)
  • up to 6 mon
Weight without humidifier
  • 1.36 (3) kg (lbs)
Electrical requirements
  • 100-240 VAC and 50/60 Hz
Filters
  • Foam and optional ultra-fine
Device set-up
  • LCD/control wheel/push button
Data storage capacity Display (minimum)
  • Compliance VIC, 1-, 7- and 30-day averages
Data storage capacity SD Card (minimum)
  • >1 yr
Compliance meter
  • Breathing detection
Altitude compensation
  • Automatic
Humidification
  • Integrates with System One 60 Series heated humidifier and System One 60 Series Heated Tube humidifier
Miscellaneous
  • Lighted LEDs
General system
General system
Pressure range
  • 4 to 25 cm H₂O
Flex pressure relief
  • 0 to 3 cm H₂O
See all specifications
General system
General system
Pressure range
  • 4 to 25 cm H₂O
Flex pressure relief
  • 0 to 3 cm H₂O
Ramp time
  • 0 to 45 min (5-min increments) minute(s)
Warranty
  • Two years (US only)
Starting ramp pressure
  • 4 to min EPAP pressure (patient adjustable) and 4 to min EPAP pressure (auto mode) cm H₂O
Diameter
  • 18 cm L x 14 cm W x 10 cm H (7" L x 5.5" W x 4" H)
On-board data storage capacity (minimum)
  • up to 6 mon
Weight without humidifier
  • 1.36 (3) kg (lbs)
Electrical requirements
  • 100-240 VAC and 50/60 Hz
Filters
  • Foam and optional ultra-fine
Device set-up
  • LCD/control wheel/push button
Data storage capacity Display (minimum)
  • Compliance VIC, 1-, 7- and 30-day averages
Data storage capacity SD Card (minimum)
  • >1 yr
Compliance meter
  • Breathing detection
Altitude compensation
  • Automatic
Humidification
  • Integrates with System One 60 Series heated humidifier and System One 60 Series Heated Tube humidifier
Miscellaneous
  • Lighted LEDs

You are about to visit a Philips global content page

Continue

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.